Search This Blog

Sunday, November 20, 2011

Archy, Archy!

No, this blog entry won't be talking about All in the Family episodes. It's about an older type of Arch; the type used by the Romans to support heavy burdens like bridges and buildings.

An arch is also perfect for holding up beautiful things, like roses. Let me explain.

To get the most flowers from a climbing rose, or any rose that has long canes, your best bet is to tie the canes to something so the canes stretch out at a 45 degree or flatter angle.



Not only does this look tidier than letting the canes wave around in the breeze, it enables the canes to produce flowers all along their lengths instead of just at the tips.

For this reason, many people plant a climbing rose next to a fence and tie the canes to the fence rails or pickets.

But what if you have a solid wall instead of a fence? In some cases, you could install a trellis; but just make sure you anchor its base securely, preferably in cement. If you don't, the first windy day will rip up the trellis and possibly damage the rose attached to it.

In my case, I couldn't find a trellis that was long and wide enough to suit my needs. So I just used some rebar from the hardware store and improvised... An arch.

I wanted the roses to look like they are flowing along the top of the wall, so I decided to make simple arches of rebar, installed in a row right next to the wall. The rebar would be practically invisible behind the wall and among the rose canes.



To bend a length of rebar, step on one end and pull the other end towards you until the bar starts to bend. Rebar is quite rusty, so you might want to wear gloves when you do this.

After the first bend, you can step on various parts of the rebar and pull on one end or the other until you get an arch that looks good to you.

Here is the arch I made this week for my Parade climbing rose. It's not a perfect curve, but I don't care because no one will see the arch after I install it.



When I finished bending the rebar, I stuck the ends into the dirt right next to the stone wall. I made sure the highest part of the arch was located about where I wanted to attach the first rose cane.

After I tie the rose canes to the arch (using stretchy strips of nylon stockings), the rose will be about 2 1/2 feet high, and a total of 12 feet long (6 foot canes trained in opposite directions).

Because the rose is now so short, the wall and house protect if from most of the wind, and I don't have to do anything special to anchor the ends of the arch in the soil.

You have to look good and hard to catch a glimpse of the rebar. Here you can see a little bit of the top if you look closely.